Slide Sheepskin Slippers Made in the USA

A: Hi
You could wear either 8.5 or 9 in our sizes....I would get the 8.5 if you like a snug, bare foot fit, or a 9 if you usually have a sock or want a looser fit. Either will stretch a bit, Thanks for the interest in our made in the USA products! Answer provided by:  Administrator (10/26/2015)

A: yes, these will fit a wide foot. Answer provided by:  Administrator (12/7/2015)

A: yes, the foam and sheepskin insert should work best. Answer provided by:  Administrator (12/7/2015)

A: The men's sizes run true to size in most cases. You can select sizes in Mens when ordering and if there is any adjustments needed, we will do so when filling your order. Answer provided by:  Administrator (2/8/2016)

A: Good morning Grammy,

There is about 3/4 inch seam in the back.

Hope that helps,
Ashley Answer provided by:  Administrator (10/25/2016)

A: Hi George. Thanks for your interest in our slide sheepskin slippers. The standard sole on this model is the leather sole, at $95.00
The other option is a natural crepe sole, and this is the sole you would want if traction is your main concern, as it is more "grippy," especially on wet surfaces . Both the leather and the crepe are similar weight. flexibility, and feel,. Leather is the most durable. The crepe is a special order on the slides so if that is what you want, please call us. The cost of the crepe sole slide is $104.00
Thanks again!
Jean
1 888 479 2244 Answer provided by:  Administrator (11/1/2016)

A: Hey Anna,

These do run true to size. If you plan on wearing socks with them or have wide feet I would say get the 7 1/2. If you plan on wearing them with bare feet then I would get the size 7. The sheepskin will pack down and stretch a bit, so you want a snug fit at the beginning.

Hope that helps,
Ashley
Sundance Answer provided by:  Administrator (11/6/2017)

A: Hey Connie,

There is a 1" lip in the back of these slippers that help keep them on but not much for support. I would suggest you look at the Colorado Moccasin slipper if you would like support in the heel. If you wanted to add crepe to the Slide you would have to call in a custom order. If you want crepe bottom on the Colorado Moccasin, just scroll down on the slippers page and they are down towards the bottom.

Hope that helps,
Ashley
Sundance Answer provided by:  Administrator (11/13/2017)

A: Good morning,

Our slippers usually fit up to 3E in the width. You could give them a try and if they did not work we would have to do a custom cut. I would put it in the comments section that it is for a 4E width at the time of ordering If you would like to order. Have him try barefoot on the carpet for 15 mins. You want a snug fit to begin with because they will stretch and pack down a little bit. As long as they are in like new condition you can return them if they do not work. We will not be taking any custom orders until after February 1st since we are in our busy season. If you do want to do a custom order there is a $25 fee and 15% restocking fee if you need to return or exchange for any reason. We recommend sending us a hard copy of a foot tracing of both feet.

Hope that helps,
Ashley
Sundance Answer provided by:  Administrator (11/30/2017)

A: Good morning,

The crepe is good for wet or icy surfaces. A lot of our older customers like them to prevent slipping with old age. The leather sole does just fine on wood floors and stairs. We do use latex glue to attach the sole to the slipper, but there is no contact with skin and we have not had any issues with previous customers.

Hope that helps,
Ashley
Sundance Answer provided by:  Administrator (11/30/2017)